The passive solar building design and energy efficiency with BIM

With the increase in population, the need for energy is increasing day by day and environmental pollution is generated by the use of non-renewable sources to meet the need. The Kyoto Protocol was signed in 2005 in order to reduce the harmful gases and to protect the environment. However, both renewable and clean energy sources have been sought. The sun is the most efficient of these sources. Indirect or direct use of the sun and energy, building spend the annual amount is intended to reduce. For this, the low cost passive house issue has been discussed. According to the climate conditions in which the structure is located, architectural design was made and energy costs were reduced. Special drawing and analysis programs have been developed to make this studies. All these approaches are combined under the BIM concept. In this study, a nursery was designed in Revit Architecture program in Gaziantep in accordance with passive house standards and environmental regulations. Energy analysis part is calculated in Design Builder program. As a result of the analysis, the positive effects of the passive house standards and environmental regulations on energy performance were observed.