The effect of repairing cracks with epoxy injection on bending stiffness of reinforced concrete beams
2008
0 views
0 downloads
Advisor: Dr. Bengi Aykaç
Abstract (EN)
In this experimental study, the cracks which occur in predamaged RC beams, exposed to reversed cyclic loading, are repaired by epoxy injection and its effect on flexural stiffness is investigated. The flexural stiffness is calculated from the initial tangent of the load-displacement curves throughout the study.Results of the experiments indicate that recovery in flexural stiffness of cracked RC beams repaired by epoxy injection is mainly related with the quality of application and crack width. Satisfactory results and increase in flexural stiffness have been achieved for mid-level cracks. However, in case of minor cracks, due to poor application of epoxy injection, any increase in flexural stiffness could not be achieved. In case of large cracks where the amount of the injected epoxy is large, the observed increase in the flexural stiffness is believed to be related with the elasticity modulus of hardened epoxy.
Author
Altan Yavuzcan
Institution
How to Cite
Altan Yavuzcan (Master Thesis). The effect of repairing cracks with epoxy injection on bending stiffness of reinforced concrete beams, 2008, Gazi University, İnşaat Mühendisliği Bölümü.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Gazi University
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Evaluatıon of calcium hydroxide removal efficiency of two different irrigation activation techniques from artificial internal resorption cavities prepared at different root levels(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)
