Wishbone arm of the bushes loading output affective investigation of the parameters

Shocks and suspension systems installed on vehicles; group of elements providing comfort and confidence. It is also imperative to design and produce in the best possible way with the other systems. The wishbones, which are located in the prearrangements of the cars and work with the suspensions, can prevent any kind of damage if the vehicles suddenly get into a pit. However, if the pits are struck hard, the car may be confronted with a wishbone failure. For this reason, people have to use their tools with care and have a great precaution, especially protecting the rugged fronts like pits. The car wishbone, which is very important among the pieces in the car, has important parts in itself. The car wishbone is one of these pieces. One of the most important parts of the suspension system in vehicles is the wishbone arm, which has two important tasks: to keep the wheels in the desired position and to move safely in only the up and down directions. Another important task is to meet the horizontal forces that occur during the acceleration and to limit the movement to the comfort and safety. The most important task expected from the pendulum-bearing pendulum over the wishbone arms is that it never leaves the installation site under loads in service conditions, except for the strain exerted by the use of special equipment during maintenance. It is evident that the occurrence of such a zodiac sign in a vehicle that is in motion can lead to serious loss of materiality and, most importantly, vital loss. In such connections it will be very useful to consider all variables affecting the bouncing force and to determine the most appropriate mounting conditions for the given construction. Within the thesis; In general, it should be examined in the current situation; 1-Brush-bed diameters conformity, 2-Examination of the effect of the amount of bending and the post-bending rubber values on the bending strength, 3-The effects of surface roughness value on the extraction force are three main headings.