Different grades of concrete production factors affecting the structure and vine yards

The construction sector, which is one of the basic building materials of concrete minimum of 3is a composite material made from different materials. Resulting in the production of concrete and aggregate bond between the cement hydration structures and new products exhibit different properties under pressure. In this thesis, before experimental studies of aggregates, cement and slag which is attributable analysis was performed. Studies the appropriate standards C30, C30 gross, C35, C35 gross, C40,C40 gross classes production in order to make 5-12 mm and 8-22 mm in size in 2 different crushed stone, stone powder, naturals and, water, cement and various additives using normal concrete and normal concrete form close-packed concrete is produced. 15x15x15 cube of concrete samples taken 27 days after a day in the lime-saturated water at 20 ±2º C did they cure. Concrete samples aggregate gradation, the amount of cement, the cement aggregate or relation, water/cement ratio in the concrete, the chemical and mineral additives rate, humidity and temperature factors by looking at the link structure of the compressive strength sensitivity by examining the experimental work has been completed. Keywords: Concrete production, Aggregate gradation, Quantity of cement in concrete, Cement aggregate relation, Water/cement ratio, Concrete compressive strength, Concrete chemical and mineral admixtures.