Fotonik sistemlerin doğrusal olmayan dinamiklerinin yönetimi: Soliton-similariton fiber lazer ve doğrusal olmayan lazer litografisinin gösterilmesi

Nonlinear effects easily and unavoidably arise in ultrafast optics, often acting as sources of limitation to performance. However, many fascinating phenomena, from generation to utilization of ultrashort laser pulses rely on the very same nonlinear effects. Deep understanding of the governing dynamics, coupled with mechanisms through which they can be controlled or manipulated holds potential for observing new phenomena, as well as achieving new functionalities, which can be difficult or even impossible to achieve otherwise. This thesis presents a series of work, starting from a novel mode-locked oscillator for generating ultrashort pulses, followed by amplification of ultrashort pulses to microjoule-level energies, finally a novel nanostructuring mechanism relying on the nonlinear interaction of such pulses with the surface of a metal. The novel mode-locked laser developed in this thesis is one in which pulses propagate self-similarly in the presence of amplification, as similaritons, in one part of the cavity and as soliton-like pulses in the rest of the cavity. The co-existence of the seemingly incompatible similariton and soliton-like waves subject to the boundary conditions of a laser oscillator requires in the presence of a narrow bandpass filter and result in spectral breathing of the waves by unprecedented one order of magnitude, constituting the observation of the strongest nonlinear effects in any mode-locked laser to date. The laser reduces to the dispersion-managed laser in limit of large filter bandwidth and to the all-normal-dispersion laser in the limit of vanishing anomalous-dispersion fiber. Thus, all the four basic mode-locking regimes are covered. As such, we believe the unraveling of this regime can be instrumental in deeper understanding of all the mode-locking regimes. Importantly, by showing that two attractor solutions can co-exist in a single laser cavity opens the door to new future designs. From an applications point of view, the laser is easy to mode-lock and exhibits excellent short-term and long-term stability, indicating high potential for high precision materials processing applications. We also illustrate, to our knowledge, the first high-energy, all-fiber implementation of the nonlinear chirp pulse amplification technique, which allows us to achieve in-fiber peak powers of 57 kW. We demonstrate a fiber amplifier with no free space beam pump or signal beam propagation, producing 70-ps chirped pulses with 3 uJ and 4 uJ pulse energies, which are compressible to 140 fs and 170 fs, respectively, via a grating compressor. The amplified output can be used directly, as a picosecond source, or compressed externally in a grating compressor. This approach results in a completely robust, misalignment-free system, with peak powers approaching 10 MW. This was, at the time of publication, the highest peak power obtained from an integrated fiber amplifier. Finally, we apply the laser systems we developed, together with the lessons learned from our implicit control of the nonlinear dynamics to demonstrate a method that utilizes positive nonlocal feedback to initiate, and negative local feedback to stabilize growth of self-organized metal oxide nanostructures, initiated and controlled by ultrafast pulses. We achieve unprecedented uniformity at high speed, low cost, and on non-flat or flexible surfaces. By exploiting the nonlocal nature of the feedback to stitch the nanostructures seamlessly, we are able to cover indefinitely large areas with sub-nm uniformity in periodicity. We demonstrate our approach through fabrication of TiO2 and tungsten oxide nanostructures, which can be extended in principle to a large variety of materials. Key words: Fiber optics ampli?ers and oscillators, mode-locked lasers, ultrafast lasers, laser materials processing.