Gerçek zamanlı impedimetrik mikroakışkan damlacık ölçümü: IDM
2019
0 views
0 downloads
Advisor: Yrd. Doç. Dr. Çağlar Elbüken
Abstract (EN)
Droplet-based microfluidic systems require a precise control on droplet physical properties, hence measuring the morphological properties of droplets is critical to obtain high sensitivity analysis. The ability to perform such measurements in real-time is another demand which has not been addressed yet. In this study, coplanar electrodes were used, and configured in differential measurement mode for impedimetric measurement of size and velocity. To obtain the size of the droplets, detailed 3D finite element simulations of the system were performed. The interaction of the non-uniform electric field and the droplet was investigated. The electrode geometry optimization steps were described and design guideline rules were laid out. Size of the electrodes was optimized based on the simulations for droplet lengths ranging from 300 to 1500 µm. A user-friendly software was developed for real-time observation of droplet length and velocity together with in-situ statistical analysis results. A detailed comparison between impedimetric and optical measurement tools is given. Finally, to illustrate the benefit of having real-time analysis, iDM was used for experimental studies. First study case is the response time of the syringe pump and pressure pump driven droplet generation devices. This analysis allows one to evaluate the 'warm-up' time for a droplet generator system after which droplets reach the desired stead-state size required by the assay of interest. Second, an evaluation chip was designed to investigate effective factors and their interplay with droplet length variation. A comprehensive design of experiment (DoE) method is utilized. Analyzing the obtained results, revealed effect of each factor and their interactions. Exploiting results of this study contributes to monodisperse microfluidic droplet generation. Monodisperse polymeric particles of polyethylene glycol were synthesized to demonstrate the potentials of monodisperse droplet generation in biochemical synthesis/analysis.
Author
Dr. Abtın Saateh
How to Cite
Abtın Saateh (Master Thesis). Gerçek zamanlı impedimetrik mikroakışkan damlacık ölçümü: IDM, 2019, Bilkent University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Bilkent University
- Geç Antik Çağ'da Aşağı Tuna: Histria örneği(2023)
- Petrol fiyatları ve getiri eğrisi(2024)
- Sözle yönlendirme üzerine makaleler(2014)
- İletişim ağları ve sağlık uygulamaları için çok kollu haydut algoritmaları(2022)
- Türk Anayasa Mahkemesinin içtihatları ışığında karşılaştırmalı anayasal mutluluk(2023)
- Doğrusal karbon zincirlerinin yoğunluk fonksiyoneli teorisi ile incelenmesi(2023)
