Hidrolik güç ünitelerinin nümerik olarak incelenmesi

Hydraulic power units (HPUs) are vital in industrial applications, but they encounter challenges due to air entrainment in hydraulic oil, which impacts flow stability, reservoir performance, and the environmental footprint. This study aims to quantify the influence of key design parameters—including initial air content, baffle configuration, volumetric flow rate, and oil temperature—on air entrainment behavior in hydraulic reservoirs and to identify the dominant contributors to entrained air volume using Computational Fluid Dynamics (CFD) based multiphase flow modelling and machine learning analysis. This study combines CFD multiphase flow modelling with machine learning algorithms to enhance understanding of HPU behavior, specifically regarding air entrainment and material efficiency. Through 300 simulations, the analysis systematically examines critical parameters, including initial air content, baffle configuration, volume flow rate, and oil temperature on air distribution and circulation. Results show that increasing baffle numbers can elevate air entrainment up to 13-fold for specific initial air levels while maintaining a Circulation Ratio (Cr) above two minutes effectively reduces air content without expanding reservoir size. A key finding is the potential reduction in reservoir volume by up to 50%, resulting in a 37% decrease in carbon emissions and substantial material savings, with only a 3% increase in air content. This study presents a framework for HPU optimization that addresses both operational stability and environmental sustainability, thereby supporting advancements in hydraulic engineering by striking a balance between efficiency and reduced resource use.