Iron, cobalt, chrome plating electroless nickel powders electrical and mechanical properties of composite manufacturing investigation

In this study, two different samples prepared by the method of sample preparation in the sintered composite were produced five different temperatures. Examining mechanical properties of the composites produced with the most appropriate preparation method, and the composite having good properties were determined. In the study, iron (Fe), cobalt (Co) and chromium (Cr) powders, which were electroless nickel plating method was user for prepared in first method. In the second method, Fe, Co, Cr powder with Ni powders were at by homogeneously mixed after pressingis powders 800,900,1000,1100,1200 º C were sintered under Argon. Sintered densities of the samples were calculated and measuring the hardness. Electroless nickel plating is the most appropriate method and mechanical properties obtained in the samples sintered at 1200 ° C as the metallographic, Edx and mechanical tests have been proved.