Smart vehicle security and tracking system

The smart vehicle system is a simple system device. Users can install this system device in their vehicles and use it without any difficulty. It is active for any smartphone that can use Google Maps, and send and receive SMS. The smart vehicle security and tracking system consist of two parts: the hardware and the software. The hardware consists of five units: a GSM modem, a microcontroller, a GPS modem, an Ultrasonic Sensor and an RFID modem. The first important component of the hardware is the microcontroller, which is the brain of this system. All hardware units connect to this microcontroller. The Arduino Mega 2560 and Arduino UNO are used to build this system. The second device is the SIM900 GSM/GPRS modem. This modem is used to connect to the GSM network and is responsible for sending and receiving instructions and alerts. The third device in the system is the GPS modem. This modem obtains vehicle position and sending this information to the vehicle owner's mobile phone. The fourth device is the Ultrasonic Sensor. This sensor is used to stop a vehicle when it unsafely approaches any object such as another car, tree, wall, or person if the driver is busy, loses concentration or has a heart attack or any event that causes the driver to be unable to drive. The fifth device in the system is the RFID. This device is used as a security device in cases where the vehicle door is opened illegally without the use of the RFID card system. This device will send an alert to the owner. The software is the second part of this system. The purpose of the software is to control and monitor the system. Keywords: Vehicle Tracking, Smart Vehicle, Security Vehicle.