Sonsuz boyutlu sistemlerin frekans tepkisi versisinden indirgenmiş dereceli modellenmesi

In this thesis, a system identification method using frequency response data is studied. Identification method is applied to various types of distributed parameter systems, in particular flexible structures. One of the challenging tasks in the control of flexible structures is the estimation of the dominant modes (location of resonant frequencies and associated damping coefficients). In the literature, there are several studies where transfer functions of flexible structures are derived from PDEs (Partial Differential Equations); these are infinite dimensional models. In this study, a numerical method is proposed to identify the dominant flexible modes of a flexible structure with an input/output delay. The method uses a frequency domain approach (frequency response data) to estimate the resonating frequencies and damping coefficients of the flexible modes, as well as the amount of the time delay. A sequential NLLS (Non-Linear Least Squares) curve fitting procedure is adopted. Instead of optimizing over all available data collected on a frequency interval, a data selection scheme that increases the amount of data at each step is followed. Selecting relevant parts of data and optimizing sequentially increasing number of coefficients in every step is the essential part idea behind this approach. The optimization problem solved reduces to a curve fitting problem. It is illustrated that such a Newtonian optimization method has the capability of finding the parameters of a reduced order transfer function by minimizing a cost function involving nonlinearities such as exponential and rational terms. Further model reduction techniques can be applied by analyzing Hankel singular values of the resulting transfer function. Comparisons with other methods solving similar problems are illustrated with examples. Simulation results demonstrate efficiency of the proposed algorithm.