Master'sOpen Access

Design and manufacturing of a double suction axially split single-stage centrifugal pump with staggered blades

Is this your thesis?

This record came from a bulk archive import. If it’s yours, link it to your profile.

2018
0 views
0 downloads

Abstract (EN)

The aim of this thesis is; design and manufacture a high efficiency split case water pump having a good suction ability and staggered blade arrangement. The operating life of a centrifugal pump is affected by the magnitude of the radial forces. Fundamentally, these forces are due to pressure variations around the impeller periphery which is a result of the complex interaction of two main components; impeller and volute. There are several approaches in the literature for load reduction. Double volute pumps have been successfully used for years. However, this method involves serious manufacturing problems and efficiency losses. This paper aims at using the effectiveness of a new approach called staggered blade arrangement for the reduction of radial forces in a double suction pump. A comparative analysis is performed by judging several key parameters such as pressure, velocity and reaction forces. In the thesis, the main dimensions of the impeller and volute were determined by use of the empirical expressions, dimensionless numbers and some dimension rations in the literature for the desired flow rate, head and rpm. Preliminary design of the impeller geometry was completed by using a pump design software which is developed for the purpose of this study and then the volute and suction bodies were designed. The flow analysis of the pump was performed using FLUENT software and the optimum pump geometry was created after dipping into some possible performance improvements. Finally, the pump was manufactured and tested on a hydraulic laboratory of a company to obtain and evaluate the characteristic curves.

Author

Hıdır Yankı Kılıçgedik

How to Cite

Hıdır Yankı Kılıçgedik (Master Thesis). Design and manufacturing of a double suction axially split single-stage centrifugal pump with staggered blades, 2018, Ege University.

Keywords

License

Tüm Hakları Saklıdır

This work is shared under the specified license terms.

More theses from Ege University