New differential pulse polarographic methods for the determination of boron, tin and arsenic species and application
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
Abstract (EN)
It was found that sodiumborohydride (NaBH4) could be determined in an electrolyte containing both 0.05M phosphate buffer (pH=9) and 0.1 M KNO3 from its peak at ?0.06 V (the detection limit was 6 x10-7 M). No interference was observed from Fe(III), Cr(VI), Cd(II), Pb(II) and Zn(II) ion. Only copper(II) had an interference, which could be eliminated with EDTA.A catalytic method has been developed for the detection of nearly 10-14 M BH4- concentration.Trace tetraborate (B4O7=) determination could be accomplished indirectly by the use of the tetraborate complex of copper in 0.5 M KNO3. The detection limit was 8x10-7 M. The interference of Fe(III), Pb(II), Cd(II), Zn(II) and Ca(II) has been investigated. Borate has been determined in borax mineral, in waste water of borax factory and in tap water of Ankara.For the speciation of Sn(II) and Sn(IV) the medium of 0.1 M NaOH and 0.1 M KNO3 was found as the most suitable electrolyte. The detection limit was 5.5x10-7M. In a solution containing both of these ions first Sn(II) has been determined from its ?1.17 V peak, then total tin was determined after reduction of Sn(IV) . The interference of Fe, Cu, Pb, Cd and Zn ions has been investigated. Iron(III) and copper(II) ions will oxidize Sn(II) to Sn(IV) and thus interfere. It was shown that this interference could be eliminated with NaBH4 which was added for the reduction of Sn(IV) into Sn(II). Using this method Sn(IV) in tomato sauce was determined.For the determination of As(III) and As(V), effects of pH and several electrolytes have been investigated. The most suitable electrolyte was found as 0.1 M HCl for as As(III). Using the peak at ?0.82 V the detection limit was 6x 10-7 M. Since As(V) is not electroactive, it had to be reduced with KI into As(III) and then determined. The interference effect of Fe, Cu, Pb and Zn ions was investigated and it was found that only Fe oxidized As(III) to As(V). This interference could be eliminated with KI which was added for the reduction of As(V). This method was applied for the determination of As(III) in tap water of Ankara.
Author
Ülkü Ünal
How to Cite
Ülkü Ünal (Doctorate thesis). New differential pulse polarographic methods for the determination of boron, tin and arsenic species and application, 2009, Gazi University, Kimya Bölümü.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Gazi University
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Evaluatıon of calcium hydroxide removal efficiency of two different irrigation activation techniques from artificial internal resorption cavities prepared at different root levels(2021)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)
