Production and characterization of CaO ceramics by spark plasma sintering (SPS)
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
Abstract (EN)
In this study, calcium oxide (CaO) based ceramics, which have potential for high temperature applications, were fabricated by Spark Plasma Sintering (SPS), one of the advanced sintering technologies, and the structural, microstructural and mechanical properties of the samples were systematically investigated. CaO is a suitable ceramic material candidate for various high temperature applications due to its high melting temperature, superior refractory character and chemical stability. However, since it is difficult to obtain compact structures with sufficient density by conventional sintering techniques, the SPS method was used to produce high-density CaO ceramics at lower temperatures and in short times. Within the scope of the study, the sintering process was carried out under different temperature (1500℃, 1550℃, 1600℃, 1650℃), pressure (40 MPa) and dwell time (5 and 10 min.) parameters and optimum sintering conditions were determined. The microstructural properties of the produced ceramics were analysed by Scanning Electron Microscopy (SEM) and the phase compositions were characterised by X-ray Diffraction (XRD). The bulk densities of the samples were calculated by Archimedes' principle. The data obtained revealed that the SPS method is a highly effective method for the rapid, energy efficient and high density production of CaO based ceramics. In this context, the study shows that SPS technique has a high potential in the development of CaO-based ceramics for functional applications. Keywords: CaO, Spark Plasma Sintering (SPS), ceramic, microstructure, characterization, density, XRD, SEM
Author
Ertuğrul Eser
How to Cite
Ertuğrul Eser (Master Thesis). Production and characterization of CaO ceramics by spark plasma sintering (SPS), 2025, Kütahya Dumlupınar University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Kütahya Dumlupınar University
- Ağca Ali, Çavuşlar, Dereşeyh, Odabaşi, Kara Ahmedlü, Karaağaç ve Araplar, Kutludiğin (Kutludüğün), Yenişeyh in the province of Ankara in the province of Balâ according to the Temettuat Book 1845 (H. 1261)(2021)
- Comparision of the leg and ARM CYCLE ergometer exercises in terms of the effects on physical and psychological functions in patients with undergoing coronary arter bypass surgery(2016)
- Effect of work stress on work motivation: An application in shopping center(2019)
- Investigation of the effect of frit composition on color of CuO containing glazes(2020)
- Design and modeling of hybrid engines(2022)
- In nitric acid production process improvement of ammonia oxidation reactor and analysis with CFD(2024)
