Master'sOpen Access

Evaluation of earthquake induced bearing capacity losses in shallow foundation on sand

Is this your thesis?

This record came from a bulk archive import. If it’s yours, link it to your profile.

2025
0 views
0 downloads

Abstract (EN)

Earthquakes that have occurred from past to present cause serious damage to load-bearing systems. It is likely that these earthquakes will continue today in Turkey, which is located in one of the most important earthquake zones in the world. As a result of the damage caused by the earthquake, there is loss of life and property. For this reason, any damage that occurs in the load-bearing system after an earthquake is of serious importance. Earthquakes that cause damage to structures also cause losses in bearing capacity. Before designing the load-bearing systems, it is necessary to know the parameters that may cause bearing capacity losses in the ground. It is vital to know the bearing capacity losses caused by the earthquake in advance. It is the duty of the foundations to transfer the loads from the structure and its own weight to the ground. Shallow foundations are applied on solid ground close to the soil surface. When designing shallow foundations, it is aimed to transfer the loads to the ground safely. In geotechnical engineering studies, it is important to know the properties of the ground on which the structures will be built. For this reason, when designing shallow foundations, ground properties, effects caused by earthquakes, building load and bearing capacity losses should be taken into consideration. Damages and settlements in buildings are generally thought to be caused by liquefaction. However, in soils where there is no liquefaction, loss of bearing capacity due to the effect of an earthquake can cause damage and collapse in structures. For this reason, importance should be given to studies on earthquake-induced bearing capacity losses. In this thesis study, it is aimed to evaluate the bearing capacity losses occurring in superficial foundations settled on sand due to the effect of the earthquake. In this thesis study, analysis was made with the data in the ground survey reports taken from certain regions of Kuşadası district of Aydın province. Using the pseudo-static analysis method, firstly static bearing capacity results were obtained with these data. Then, earthquake-induced bearing capacity results were obtained by using 5 different methods for each data. The obtained static bearing capacity results were evaluated. Then, the relationships between the earthquake-induced bearing capacity results obtained from the methods used in the study and the static bearing capacity results were interpreted respectively. Finally, a general evaluation was made for the earthquake-induced bearing capacity results and static bearing capacity results obtained from 5 different methods. As a result of the evaluations, it was seen that the earthquake-induced bearing capacity results were smaller than the static bearing capacity results. There was a decrease of minimum 41% and maximum 89% between the earthquake-induced bearing capacity results and the static bearing capacity results. It has been observed that the parameters that cause earthquake-induced bearing capacity results to be lower are horizontal (kh) and vertical (kv) seismic acceleration.

Author

Emel Kök

How to Cite

Emel Kök (Master Thesis). Evaluation of earthquake induced bearing capacity losses in shallow foundation on sand, 2025, Süleyman Demirel University.

Keywords

License

Tüm Hakları Saklıdır

This work is shared under the specified license terms.

More theses from Süleyman Demirel University