Mortez: Mobile application supported orthose system design
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
Abstract (EN)
It is known that the use of orthoses is important in accelerating the treatment process in cases of musculoskeletal system disorders or injuries in the body. According to their use, orhtoses are called to as static and dynamic orthoses. In dynamic orthoses, movements of people are detected using Electromyography (EMG) signals. In addition, various sensors are used to measure data such as position and voltage. For the correct detection of the movement, it is necessary to minimize the noise in the EMG signals. In this thesis, the goal is to filter raw EMG signals in real-time using an ARM-based microcontroller, transfer the filtered output signal and encoder sensor information to a portable device using a bluetooth module. Mobile Application Supported Orthosis (MORTEZ) application has been designed for reading and evaluating EMG signals and angle information on a portable device. In addition, the EMG signals and sensor information transferred to the portable device can be recorded using the MORTEZ application.The filter type, cutoff frequency and degree used in orthotic systems are important for the correct detection of movement. In the selection of the filter to be used, the performances of the different filters on the microcontroller were compared in real-time and it was seen that the IIR filter was much more advantageous in terms of time. An 8th degree 20-350 Hz band-pass IIR filter was used with the integration of the DSP library into the microcontroller. The filter output signals obtained using the microcontroller and the MATLAB program were compared and a high level of accuracy was achieved. A dynamic graphics was designed using TouchGFX, a graphical user interface optimized for STM32. The raw and filtered EMG signals obtained on the microcontroller and the encoder angle information are displayed on the 4.3" LCD-TFT screen on the development board. The STM32CubeIDE program was also used to configure the microcontroller's peripherals and implement real-time operating system. Using the peripherals of the microcontroller, driving the screen on the development board and all filtering calculations are provided by a real-time operating system called FreeRTOS. An orthosis system that can read and filter the single-channel EMG signal in real-time on the microcontroller, transfer all obtained data wirelessly to a portable device, and record and display data through the MORTEZ application has been suggested.
Author
Orhan Gündüz
Institution
How to Cite
Orhan Gündüz (Master Thesis). Mortez: Mobile application supported orthose system design, 2023, Ondokuz Mayıs University.
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Ondokuz Mayıs University
- Child sexual abuse in Islamic criminal law(2023)
- Efficacy of bracing treatment in lenke type 5, risser stage 4-5 adolescent idiopathic scoliosis patients and its effects on pelvic parameters(2023)
- Third Murâd's Dîvân in the context of Arûz applications (1-500. poem)(2023)
- Metagenomic analysis of microbial biodiversity of of Horseshoe island, Antarctic(2023)
- Turkish validity and reliability study of "parental perceptions of children's exposure to tobacco smoke scale"(2023)
- Investigation of the effects of coenzyme q10 on isoproterenol-induced cardiotoxicity in rats(2023)
