DoctorateOpen Access

Setting up and performance evaluation of ohmic heating assisted vacuum evaporation system, and experimental investigation and mathematical modelling of the process

Is this your thesis?

This record came from a bulk archive import. If it’s yours, link it to your profile.

2017
0 views
0 downloads

Abstract (EN)

In this thesis, ohmic assisted vacuum evaporation system (OVE) was set up, and sour cherry juice was concentrated to total soluble solid content (TSSC) of 65% at constant absolute pressure (25 kPa) by OVE and vacuum evaporation (VE) methods in this system. OVE method was performed at 3 different voltage gradients (10- 14V/cm), and the change of electrical conductivity (E.C) during evaporation was investigated. The effects of OVE and VE methods on the some quality characteristics and changes of rheological behavior of concentrates during evaporation process were investigated. Performance evaluations of the OVE and VE methods were compared statistically. OVE method was mathematically modelled and compatibility of model predictions with the experimental data was determined. Sour cherry juice was concentrated to 65% TSSC by OVE and VE methods, successfully. Time required to reach the 65% TSSC was in the range of 40-85 min. The minimum process time was found for OVE method applied at the voltage gradient of 14 V/cm. In heating region, E.C increased as the temperature increased. In evaporation region, E.C increased up to 45% TSSC, and then decreased for higher %TSSC. The most suitable model describing the relation between TSSC and time was found to be as Midilli model for both evaporation methods. The effects of methods and voltage gradient were not statistically significant on the changes of pH, titrable acidity and antioxidant activity of samples (p>0.05). The minimum changes in total phenolic content, total monomeric anthocyanin and color values were found for voltage gradient of 14 V/cm (p<0.05). Rheological behavior of sour cherry juice concentrates having different TSSC were explained with Newton model, and the effect of methods on the viscosity of concentrates having 65% TSSC was not statistically significant (p>0.05). It was determined that energy and exergy efficiencies increased as the voltage gradient increased, and the method being developed was VAE application. The heating and evaporation regions of OVE method was mathematically modelled by finite element and finite volume methods. It was determined that the compatibility of model predictions with experimental data was good. It is thought that the results of this thesis will serve valuable contributions for setting up of industrial scale systems including integration of ohmic heating, which is one of the novel alternative technologies, to vacuum evaporation systems, and simulation of this method for determination of process conditions.

Author

Serdal Sabancı

How to Cite

Serdal Sabancı (Doctorate thesis). Setting up and performance evaluation of ohmic heating assisted vacuum evaporation system, and experimental investigation and mathematical modelling of the process, 2017, Ege University.

Keywords

License

Tüm Hakları Saklıdır

This work is shared under the specified license terms.

More theses from Ege University