Effect of coating parameters on the coated surfaces using powder flame spraying
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
2000
0 views
0 downloads
Advisor: Y.doç.dr. Behçet Gülenç
Abstract (EN)
In this study, the specimens whose surfaces were plain and threaded were coated using flame spraying method and various powders were used by hot and cold coating processes. The behaviour of the coatings was investigated. Metallographic investigations showed that without being dependent upon the coating method used the hardness decreased on both specimens and surface roughness increased on plain specimens as the coating thickness increased. Optic microscopy studies revealed better substrate material-coating layer interface on threaded specimens. In addition, oxide, porosity and the amount of unmelted particles were not changed based on the surface properties of the substrate.Key Words Pager Number Advisor
Author
Nizamettin Kahraman
How to Cite
Nizamettin Kahraman (Master Thesis). Effect of coating parameters on the coated surfaces using powder flame spraying, 2000, Gazi University.
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Gazi University
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Evaluatıon of calcium hydroxide removal efficiency of two different irrigation activation techniques from artificial internal resorption cavities prepared at different root levels(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)