Production and optimization of pyrolytic oil from wild plants

Developing technology creates a high energy need and it is necessary to seek alternative energy sources in order to meet this high energy need. For this reason, cattle tail plant, which is inactive in nature, has been used as an energy source. In the experimental study, it was aimed to produce pyrolytic oil from cattle tail plant by pyrolysis method. In order to achieve optimum production values during experiments, 0.5, 1, 1.5 L / min propellant nitrogen (N2) gas flow rate and 5, 10, 15 ° C/min heating at 400, 450, 500, 550 ° C temperatures It was examined under speed values. As a result of the experiments, it was determined that the most efficient production values were at 500 ° C temperature, 0.5 L / min propellant nitrogen (N2) gas flow rate and 10 ° C/min heating rate. Analysis results found that its kinematic viscosity at 40 ° C was 2.60 mm2/sec, its density was 1.1358 g/cm3, the sulfur rate was %0.17 and the water ratio was %3.