Strengthening of reinforced concrete beams with steel plates
2008
0 views
0 downloads
Advisor: Dr. Bengi Aykaç ; Dr. Sabahattin Aykaç
Abstract (EN)
Experiments for flexural strengthening of reinforced concrete beams using epoxy-bonded steel plates were carried out. Seven 1/1 scaled reinforced concrete beams including one reference and six strengthed beams were tested under two point monotonic loading. In this study, main parameters considered were plate thickhness, efficiency of bonding method and using side face steel plates. On basis of the experimental study, the performance of the specimens were evaluated as regards strength, ductility, energy dissipation and stiffness. At the end of the study, it was observed that satisfactory behaviors can be achived with using epoxy bonded steel plate for strengthening of reinforced concrete beams.
Author
Dr. Servet Karahan
Institution
How to Cite
Servet Karahan (Master Thesis). Strengthening of reinforced concrete beams with steel plates, 2008, Gazi University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Gazi University
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- Deveplopment of semiconductor humidity sensors(2021)
- The effect of computer-assisted and direct strategy teaching on reading comprehension(2021)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- An investigation of the contribution of oud player to music education in terms of microphoning techniques, use of equalizer and sampler production(2021)