Static analysis of rectangular with finite elements method composite plates
2011
0 görüntülenme
0 i̇ndirme
Danışman: Prof. Dr. Mahmut Özbay
Özet (EN)
In this study static analysis of the rectangular with finite elements method composite plate was performed. Stress, strain and deformation analysis were achived at varius boundary conditions along the plate by changing support nodes places and applying different forces for various materials. Boron/Epoxy, Glass/Epoxy and Grafite/Epoxy materials were considered.Static analysis of reinforced with fiber laminated composite rectangular plates was investigated by using finite element method. Static analysis was performed at composite plate by modeling with ANSYS 12 programmed. Finally, Boron/Epoxy material is the most suitable material for inspected boundary conditions due to the detection of at least stress the value of the Boron/Epoxy materials was determinate that..
Yazar
Dr. Müberra Gül
Bu Yayına Nasıl Atıf Yapılır
Müberra Gül (Master Thesis). Static analysis of rectangular with finite elements method composite plates, 2011, Gazi University.
Anahtar Kelimeler
Lisans
Tüm Hakları Saklıdır
Bu eser belirtilen lisans koşulları altında paylaşılmaktadır.
Gazi University tezlerinden daha fazlası
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)
- Deveplopment of semiconductor humidity sensors(2021)