Position control of two degree of freedom mobil manipulator
2006
0 görüntülenme
0 i̇ndirme
Danışman: Prof.dr. Mehmet Eroğlu
Özet (EN)
POSITION CONTROL OF TWO DEGREE OF FREEDOM MOBILMANIPULATOR(M. Sc. Thesis)Fırat YÜCELGAZ UNIVERSITYINSTUTE OF SCIENCE AND TECHNOLOGYSeptember 2006ABSTRACTTo find the dynamic model of mobile manipulator having two degrees offreedom and to achieve the position control of manipulator is the maintarget of this study. As manipulator system is a nonlinear system,linearization process was carried out. The linearization process was realized byfinding equations that express small deviations around nominal trajectory. PIDcontroller was used as control design instrument in the system. Accelerationspropagating from ground in x0 and y 0 directions, were applied to the systemand the results were scrutinized . Rlocus function in the environment of Matlabwas utilized for the system stability.Science Code :914.1.091Keywords :Position control , manipulator , roboticPage number :81Adviser :Prof . Dr. Mehmet EROĞLU
Yazar
Dr. Fırat Yücel
Bu Yayına Nasıl Atıf Yapılır
Fırat Yücel (Master Thesis). Position control of two degree of freedom mobil manipulator, 2006, Gazi University.
Anahtar Kelimeler
Lisans
Tüm Hakları Saklıdır
Bu eser belirtilen lisans koşulları altında paylaşılmaktadır.
Gazi University tezlerinden daha fazlası
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Evaluatıon of calcium hydroxide removal efficiency of two different irrigation activation techniques from artificial internal resorption cavities prepared at different root levels(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
