Ipv6 configuration and developing socket based Ipv6 supported server software
2011
0 views
0 downloads
Advisor: Prof. Dr. Şeref Sağıroğlu
Abstract (EN)
New and existing technological products those will connect to IPv6 network providing IPv6 support for software servicing over those products are becoming inevitable. The current software responding to requests from IPv6 addresses present very important aspect. Having a small number of software being able to provide IPv6 support causes problems.The future of spreading the movable (mobile) or immovable electronic and wireless devices based on IPv6 protocol and the devices connected to the Internet, which use hardware and software, are seen to be shaped accordingly. Since all devices and services those are used currently do not support IPv6, there are several methods proposed by IETF (Internet Engineering Task Force) needed to be applied to implement IPv6 support. Those transition mechanisms are classified into three types named dual stack, tunneling and translators. "Design of National IPv6 Infrastructure and Transition to IPv6 Protocol" project coordinated by TÜBİTAK - ULAKBİM with participation of Gazi University, Çanakkale 18 Mart University and Turkish Information Technologies and Communication Authority has been carried out to implement IPv6 transition, supply IPv6 service and create awareness of IPv6 in TurkeySocket-based software should be configured with IPv6 in order to use IPv6 traffic in applications. The communication can be achieved through IPv6 packets by implementing IPv6 support in the server and client-based software.In this thesis study, the infrastructure software support and necessary changes have been made and an application has been developed in order to provide IPv6 support for an existing server based on POP3 application. IPv6 configuration has been carried out in order to ensure received e-mails transmission over IPv6 with this developed software, the software has been tested using Microsoft Office Outlook. Moreover, the solution proposals has been presented in the point of development of IPv6 supported socket-based software.
Author
İbrahim Akşit
How to Cite
İbrahim Akşit (Master Thesis). Ipv6 configuration and developing socket based Ipv6 supported server software, 2011, Gazi University.
Keywords
EN
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Gazi University
- Occupational accident analysis and modelling in oil and gas drilling sector Turkey(2021)
- XVI. yüzyıl Anadolu'sunda Oğuzların Karkın Boyu(2004)
- Sharing of real life geometry samples via a social learning environment: A case study(2021)
- Evaluatıon of calcium hydroxide removal efficiency of two different irrigation activation techniques from artificial internal resorption cavities prepared at different root levels(2021)
- Experimental development of the interfacial bond-slip model between textile reinforced mortar strips and masonry walls(2025)
- The use of verbal memory in the context of sustainability and power at the museums of Turk(2010)
