Determination of water footprint of dairy products industry
2024
0 views
0 downloads
Advisor: Doç. Dr. Sezen Küçükçongar
Abstract (EN)
In this thesis, it was aimed to determine the green, blue, and gray water footprints of three different dairy products (white cheese, kashar cheese and yoghurt) by using the method developed by the Water Footprint Network (WFN). Direct and indirect water footprints were determined throughout the dairy production farm, milk collection and transmission facility, and dairy facility. Total water footprints were determined as 12879 m3/ton for kashar cheese, 8371 m3/ton for white cheese, and 1674 m3/ton for yoghurt. Approximately 97.5% of the total water footprint of dairy products occurs on the dairy farm, and a significant part of this is related to the production of feed crops. Therefore, in reducing the water footprint, it is important to ensure regional regulations regarding the production of feed ingredients and to research technologies that will enable less water consumption.
Author
Dr. Qand Agha Doulat Zaı
How to Cite
Qand Agha Doulat Zaı (Master Thesis). Determination of water footprint of dairy products industry, 2024, Konya Technical University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Konya Technical University
- Numerical and experimental in vestigation of optimization of Pelton turbine rotor design parameters in micro turbine size(2018)
- Synthesis of triple ZnO-SnO2-Zn2SnO4 nanocomposides and determination of their photocatalytic activities(2022)
- Comparison of some manufacturing costs according to various analysis parameters and other regulations of reinforced concrete structures with different floor systems(2018)
- The use of silica fume in self-compacting concretes affects the concrete compressive strength and adherence(2018)
- Load-bearing carrier system properties in the historical buildings repair and strengthening techniques for damages model analysis of Zenburi masjid(2018)
- Lateral rigidity improvement of deficient reinforced concrete structures with the use of user friendly systems(2018)
