Design of cast in place reinforced concrete bridge and a project example

One of the most important factors that speed up transportation is the bridges. Due to the physical structure of Turkey. Bridges are very important as in the world, a large part of the newly built bridges in Turkey are cast-in-place bridges. The new type of bridge over the cast beam made in Turkey Manisa - Ogretmenev Interchange bridge is an example of such bridge. In this thesis; The cast-in-place bridge was modeled and analyzed with the help of CSI Bridge. The bridge has four spans and each span length is equal (23m). The total length of the bridge is 92 meters. Bridge deck material is selected as reinforced concrete. The bridge deck has a fixed width of 9 meters. Modeled bridge system in accordance with AASHTO LRFD standards moving load, constant load, etc. analysis and design of the system after loading. In Section 6, the model, spectrum seismic design is made. And the most appropriate results were obtained. Finally, in Chapter 7, superstructure design is made. And presented the results. Thus, all the model, structure, materials used, location on the earth, seismic size and features such as conditions and conditions are examined, whether the design is sufficient and acceptable. Keywords: AASHTO LRFD, Design of cast in plcae reinforced concrete bridge and a Project example, CSiBridge, cast in plcae reinforced concrete bridges