Laser beam welding of thick plates from duplex steel using buttering with laser metal deposited (LMD) layers
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
Abstract (EN)
In this study, the cladding of the duplex steel thick plate with the laser metal deposition welding method was investigated. The aim of the study is to create welded zones with different Ni ratios and to determine the Ni ratio that will give the optimal weld properties that are closest to the main material properties. At the beginning of the thesis, the literature on additive manufacturing and LMD which is the basis of the welding method examined, has been searched and also detailed information about the definition, applications, advantages and disadvantages, methods and future of additive manufacturing has been given. In the continuation of the literature review, also definitions, advantages and disadvantages, application areas of LMD welding method and materials used in LMD welding method have been explained. At the beginning of the experimental works section, there were given detailed informations about the materials and facilities used during this experiment. Then, the experimental work required to obtain the optimum welding properties, which is the aim of the study, has been explained. At the beginning of the experimental work, LMD welding with powder mixes containing four different Ni ratios was applied on duplex steel which is the main material, and the subsequent studies were carried out on these four welded zones. In the conclusions section, chemical compositions, micro and macrostructure images and hardness values of the welded zones obtained by the experiments were analyzed and the results were reported. By selecting the appropriate Ni ratio in the powder material added to create the weld, the nearest weld zone to the main material properties was determined and this result was supported by micro and macrostructure images.
Author
Artun Tüten
How to Cite
Artun Tüten (Master Thesis). Laser beam welding of thick plates from duplex steel using buttering with laser metal deposited (LMD) layers, 2018, Ege University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Ege University
- Increasing the fertilization yield of trout eggs(2013)
- Effect of microfibers on mechanical and durability properties of cement mortar mixtures(2015)
- Comparative lexicon of Qipchaq Turkish on the base of codex cumanicus(2015)
- Investigation of phyto-microbial remediation of arsenate resistance in Gönen rice by removal of arsenite(2019)
- The use of social media in city branding and its contribution to brand image: Case of İzmir(2019)
- Effect of using stevia extract as natural sweetener during production of ice cream with low calorie on quality criteria of product(2015)
