Effects of nano reinforcementon physical, mechanical and thermal properties of glass fiber reinforced epoxy matrix composites
Is this your thesis?
This record came from a bulk archive import. If it’s yours, link it to your profile.
Abstract (EN)
Composite materials are widely used in a variety of applications, from aerospace, marine, infrastructure applications to sports equipment. These commonly used materials are exposed to many loads throughout their service life. In this study, it was investigated in which situations the mechanical properties of the material can be improved by adding nanoparticles to the composite materials. Although high strength with low cost can be obtained with these materials, their fatigue life is relatively open to improvement. In this study, nanoparticle reinforcement was applied to the matrix material in order to increase the fatigue life of glass fiber reinforced epoxy matrix composites. In order to examine the effect of the nanoparticle reinforcement on the bending fatigue behavior and the effects of this reinforcement on the mechanical properties of the composite, studies were carried out with tensile test and bending test applications. In the production of glass fiber reinforced epoxy matrix composites, firstly, pure control sample was produced without nanoparticle reinforcement. Afterwards, the samples were produced by adding 1.2.3% Nanoclay and TiO2 nanoparticles to the epoxy. Tensile and bending tests were performed on these produced samples. As a result of the tensile test, it was observed that the nanoclay reinforcement increased the tensile strength of the material by 1% and 2%, and the tensile value increased at the rate of 3% compared to 1% and 2%, it was observed that the addition of TiO2 nano reinforcement at the rate of 1% increased the stress. It was observed that it decreased by 2% and 3%. According to the results of the bending test, it was observed that the tension clearly increased as the amount of nanoclay reinforcement increased. Although it is clearly seen that the stress value increases in samples with 1% TiO2 reinforcement, it has been observed that the stress values of the pure sample decrease at 2% and 3%. As a result, it has been understood that nanoclay contributes to the mechanical properties of the material by forming a homogeneous structure with the matrix material, while the TiO2 reinforcement cannot provide a homogeneous structure with the matrix material over 1% due to the material size it has, and thus contributes only to the mechanical properties of the material in certain proportions. It was observed that the nanoclay reinforcement was homogeneously dispersed in the resin in the broken samples examined by SEM analysis, while the TiO2 supplementation formed a homogeneous structure at 1%, but agglomerations were observed at 2% and 3%. As a result of the wear tests, as the nano reinforcement increased, the density of the composite material increased the friction coefficient, volume loss and specific wear rate values decreased.
Author
Mustafa Şeker
Institution
How to Cite
Mustafa Şeker (Master Thesis). Effects of nano reinforcementon physical, mechanical and thermal properties of glass fiber reinforced epoxy matrix composites, 2023, Harran University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Harran University
- Investigation of the effect of adding mustard leaf powder in different ratios on the physical chemical, sensory and microbiological properties of meat meatballs(2024)
- Changes in the physical and chemical properties of Kargı tulum cheese during maturation(2024)
- Noise estimation of additive white Gaussian noise with convolutional neural networks(2024)
- The use of liquid manure obtained from the biogas plant in cotton production(2024)
- MtDNA analysis of carassius auratus species living in Keban Dam Lake(2024)
- Solution of fractional schrodinger parabolic partial differential equation by muntz – legendre polynomial method(2024)
