Production of boron carbide based composites with boron carbide and titanium powders by spark plazma sintering
2015
0 views
0 downloads
Advisor: Prof. Dr. Filiz Çınar Şahin
Abstract (EN)
In this study, the samples containing with 5, 10 and 15 vol. % Ti were produced from the reaction between boron carbide and titanium with 100°C/min heating rates by spark plasma sintering method. The density, hardness, and fracture toughness of the samples were measured. The phases and microstructures of the composites were observed by using X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) analysis.
Author
Dr. Ufuk Şahin
Institution
Istanbul Technical University
Seramik Mühendisliği Bilim Dalı
How to Cite
Ufuk Şahin (Master Thesis). Production of boron carbide based composites with boron carbide and titanium powders by spark plazma sintering, 2015, Istanbul Technical University.
Keywords
License
Tüm Hakları Saklıdır
This work is shared under the specified license terms.
More theses from Istanbul Technical University
- Investigation Of Stretching Effect With Mixed Finite Element Formulations For Laminated Beams And Plates(2023)
- Classification of anemia using data mining methods: An application(2015)
- Removal and recovery of platinum group metals through anode slimes of moebius electrolysis(2015)
- A II. German Empire project: From Kaiser Wilhelm Monument to German fountain(2015)
- Uzaktan algılama verilerinin yersel ölçümlerle entegrasyonu ile toprak tuzluluk haritalaması; Aşağı Seyhan Ovası, Adana, Türkiye(2015)
- Numerical investigation of seepage in tailings earthen dam with clay core(2015)