Controlled system design for modification of the surface properties of materials with polimeric based exposed to corona discharge

Polymeric-based systems are nowadays in the coating, automotive industry, almost everywhere. In addition to this, the concept of electronics in the field, coating and dielectric material is here as well. In order to clean the structure, the electrical connections to which it is connected to the device take its current along the conductors away from the high limit of the puncture coefficient. The surface properties of the polymeric materials were very important before the usage area was very large. Modification of surface properties by a variety of methods or clarification of surface properties.Today, chemical, physical and physicochemical techniques are available. After the modification process with chemical methods, the formation of voluntary dependents decreases by adjusting the modification, and therefore, it is oriented towards the physical modification method. Corona discharge, a type of electrical discharge, is a physical change in the modification. This room is connected to the image processing technique, in this system it is intended that an automated system designed to modify the properties and properties of the polymerization structures and to modify the surface properties by corona discharge. The automatic cleaning of the system can take both quick results and the formation of the human factor, so that it can be tested, tested and minimized. Unlike the measurement, inspection and modification studies conducted in the literature, this system is a first if it is automatically adjusted. Denyel planning and good results were obtained with the designed system.