Effect on bond of reinforcing bars milled pumice uses of self compacting mortar

In performed experimental study, performances of self compacting mortars (KYH) producted with milled pumice powder (ÖPT) used as mineral additives the bond strength were investigated. In this context, substituted with 7%, 12%, 17%, 22%, 27% ÖPT mixtures and control mortar, total of 6 series trout samples were produced. A total of 54 pieces of 40 x 40 x 160 mm and 18 pieces 150 x 150 x 150 mm mortar specimens prepared and with different curing periods allowed to stand in city water. For all cure specimens, flexural strength and compressive strength of mortar samples at different curing periods were measured. For the bond strength, 150 x 150 x 150 mm specimens were applied pull out test. As a result of study, substituted with %12 ÖPT samples determined as has highest the bond strength to standard curing procedures within all mortar samples. As a result of this study, 28 days compressive strength values and the bond strength values was as same as observed.