Master'sOpen Access

The nonlinear analysis of geometric and material of planar frames composed of flexibly connected members with rigid end sections considering shear deformations

Is this your thesis?

This record came from a bulk archive import. If it’s yours, link it to your profile.

2012
0 views
0 downloads

Abstract (EN)

In the present study, the geometrically and materially nonlineer analysis of frames composed of members which have rigid end sections flexibly connected to the nodes has been carried out taking into consideration the effect of shear deformations and a pertinent computer program has been prepared.In the first chapter, the importance and the reasons why the research been carried out has been explained.In the second chapter, previous studies related and similar to these subjects are mentioned.In the third chapter, assumptions and notations used in this study are mentioned.In the fourth chapter, stiffness matrix method is explained in general form.In the fifth chapter, using second order theory, the member stiffness matrix for a bar with rotational springs at its ends has been obtained taking into consideration the effect of shear deformations.In the sixth chapter, using pertinent differential equations, the fixed end forces with rotational springs at its ends have been found taking into consideration the effect of shear deformations for uniformly distributed load, concentrated load, linearly distributed load, symmetrical trapezoidal distributed load and non-symmetrical triangular distributed load.In the seventh chapter, explanations concerning the computer program are given.In the eighth chapter, information concerning how to run the computer program and numerical examples are given.In the ninth chapter, the results obtained from this study are presented. The validity of the implemented computer program has been proved by solving some example problems in different ways and showing the match between the results. Problems, in the literature, which are special cases of the problems treated in this study, were solved by the present computer program and the match of the results has been observed. Using the implemented computer program and solving some examples the variations of some elastostatic quantities with the spring constants have been examined and presented.

Author

Asım Çelik

How to Cite

Asım Çelik (Master Thesis). The nonlinear analysis of geometric and material of planar frames composed of flexibly connected members with rigid end sections considering shear deformations, 2012, Dicle University.

Keywords

License

Tüm Hakları Saklıdır

This work is shared under the specified license terms.

More theses from Dicle University