Investigation of the behaviour under static and cyclic loading of construction and demolition waste embankment reinforced with geosynthetics
2018
0 görüntülenme
0 i̇ndirme
Danışman: Doç. Dr. Tuğrul Talaslıoğlu ; Prof. Dr. Abdulazim Yıldız
Özet (EN)
In this study, the use of construction and demolition wastes instead of natural aggregates in embankments subjected to static or repeated loads was investigated with the help of laboratory tests. Moreover, it was also studied the behaviour of the embankment created from the construction and demolition waste materials reinforced with geosynthetics (geotextile, geogrid, geocell) to reach the load displacement behavior of the embankment constructed from high quality natural aggregate materials. Tests were carried out on the filler layer built from the natural aggregate material to compare comparison with reinforced and unreinforced filler layer built from construction and demolition waste material. In the tests, the granular filler layer was placed on the soft soil, and then static and repeated loads were applied to it, separately. Statistical analyses (MLR, MNLR and M5T) were performed on the results of the laboratory tests and some equations were obtained. As a result of this study, it was determined that the performance of construction and demolition waste material is lower than that of high quality natural aggregate material. However, it was also found that construction and demolition waste material with a little geosynthetic reinforcement could perform better than natural aggregate material.
Yazar
Dr. Bahadır Ok
Bu Yayına Nasıl Atıf Yapılır
Bahadır Ok (Doctorate thesis). Investigation of the behaviour under static and cyclic loading of construction and demolition waste embankment reinforced with geosynthetics, 2018, Çukurova University.
Anahtar Kelimeler
Lisans
Tüm Hakları Saklıdır
Bu eser belirtilen lisans koşulları altında paylaşılmaktadır.
Çukurova University tezlerinden daha fazlası
- Credit risk management in banking sector: An application of variables determining credit risk in Turkish banking sector(2011)
- Comparasion of the shear bond strength of two different precoated and uncoated ceramic brackets(2014)
- The control tests of four anode photomultiplier tubes for hf calorimeter of CMS detector(2014)
- Association of heat shock protein with some physiological parameters in the goats(2018)
- Subalgebras of free associative algebras(2018)
- Production and characterization of ZnO/Cu2O based devices growing with spin coating method(2019)
